Torque wrenches, angular - sockets & boxes - Tools

Reversible torque wrench with automatic release via "click signal".

- Torque adjustable using stop device
- High precision

Measurement span: 6 to 30 Nm
Square drive: 1/4"

For professional use

- Supplied with calibration certificate

- reversible ratchet with automatic release via click signal
- torque adjustable by stopping device
- high precision
- delivered with calibration certificate

- reversible ratchet with automatic release
with ?click-signal?
- torque adjustable by stop screw
- length: 1235 mm

This reversible torque spanner can be used on some racing vehicles fitted with a centre wheel bolt.

- Torque spanner with a 3/4" T-bar
- Accuracy: ± 4%
- Scale in Newton Metres & lb.ft
- Tightens from 237 to 983 Nm
- Length: 1,225 mm

This spanner's head can tighten in both a clockwise and anti-clockwise direction.

Calibration tolerance compliant with standard BS EN ISO 6789:2003

Supplied with an individually-numbered calibration certificate.

Pre-set torque at 90/110/135/160/190Nm
Accuracy +/- 2%
36 teeth, bi directional ratchet with auto shut off and 110 hours of battery life
Length 480mm
Length 480mm
Weight 1.2 kgs

- reversible ratchet with automatic release
via ?click signal?
- torque adjustable by stopping device
- high precision
- delivered with calibration certificate
- overall length: 1230 mm
- effective length: 1100 mm

This wrench, featuring a digital display, enables precise torque adjustment.

An audible signal sounds when the desired torque has been reached.

Torque display: Nm, pi-lb, lbf-in
Square drive: 1/2"
Measurement range: 20 to 200 Nm

- Drive square:: 1/4" x 200 mm long
- Measurement range: 6 to 30 Nm
- Precision: +/- 4%
- Automatic cut-out
- Ratchet: 72 teeth

Supplied with calibration certificate

- Drive square: 1/2" x 275 mm long
- Measurement range: 20 to 100 Nm
- Accuracy: +/- 3%
- Automatic cut-out
- Ratchet: 72 teeth

Supplied with calibration certificate

- 1/4" ratchet
- 8 interchangeable open forks: 7 - 8 - 9 - 10 - 11 - 12 - 13 & 14 mm
- Tightening torque: 10-50 Nm
- Precision: +/- 4%

Comes with a calibration certificate.

- 9 open end wrenches 13-14-15-17-19-22-24-27-30 mm
- Calibration certificate included
- 14 x 18 mm 4-pt. for opend end spanner head

- Accuracy: ± 6%.
- R.203A spanner, N.m. scale with fixed square eye.
- Supplied in a plastic storage box with an ISO 6789 calibration certificate.

L [mm]: Box: BP.D5
Capacity [daN.m]: 0.6 - 3.6
Square []: 1/4
Scale: 2.0 N.m
[g] Max.: 300

- Accuracy: ± 4%.
- Endurance of mechanism: 25,000 cycles.
- 72-tooth ratchet (return 5°), use with sockets.
- One-way spanners.
- Touch-sensitive and audible release when the torque is achieved.
- Automatic reset.
- Supplied with

Standard: NF EN ISO 6789, ISO 6789, DIN EN ISO 6789
L [mm]: 479
l [mm]: 479
Capacity [N.m]: 40 - 200
Square []: 1/2
Scale [N.m]: 2.0
[kg]: 1.220

- Accuracy: ± 4%.
- Endurance of mechanism: 25,000 cycles.
- 72-tooth ratchet (return 5°), use with sockets.
- One-way spanners.
- Touch-sensitive and audible release when the torque is achieved.
- Automatic reset.
- - Supplied with calibration certificate ISO 6789.- Supplied in a protective plastic tube.

Standard: NF EN ISO 6789, ISO 6789, DINEN ISO 6789
L [mm]: 416
l [mm]: 416
Capacity [N.m]: 20 - 100
Square []: 1/2
Scale [N.m]: 1.0
[kg]: 1.040